Brand - ANTAL

Dynablock, Sheave D44, SWL 600 kg, with snap loop Model:  DBS44 The new Antal block with revolving resin cheekplates and with a Dyneema snap loop p...

Dynablock, Sheave D56, SWL 1000 kg, with snap loop Model:  DBS56 The new Antal block with revolving resin cheekplates and with a Dyneema snap loop ...

Headboard 40°, Track 24x16, for Racing Boats up to 50' Model: HS24.54 The headboard sewed with webbings attaches the headboard slider to the sail...

Dynablock, Sheave D56, SWL 1000 kg Model:  DBL56 The new Antal block with revolving resin cheekplates and with a Dyneema snap loop protected by a p...

Medium Snatch Block, Sheave D40, SWL 700 kg, supplied with Snap Shackle (HR). Model:  9040/SN The cheek plate revolves around the sheave axle allow...

Medium Snatch Block, Sheave D40, SWL 700 kg, supplied with Shackle  Model:  9040/SH The cheek plate revolves around the sheave axle allowing the bl...

Standard Receptacles For Flat Battens 40 x 6 mm Model: 610.340 The traditional mounting system with two screwed cheeks and the batten on one of the...

Jib Board for Shackle Ø 10 Model: JB10

Dynablock, Spare Snap Loop Model:  DBS05 The new Antal block with revolving resin cheek plates and with a Dyneema snap loop protected by a polyeste...

Winch Handle, Ball Hand Grip, Length = 200 mm Model:  2012 In addition to the extremely light black aluminium handles in two sizes: 200 mm (8 inche...

Winch Handle, Ball Hand Grip, Length = 250 mm Model:  2122 In addition to the extremely light black aluminium handles in two sizes: 200 mm (8 inche...

Antal Mini snap loop in Dyneema, Ø 5, SWL 2000 kg Model: SL5D The use of Dyneema lines, characterized by high stiffness and strength and by excelle...

Antal Mini snap loop in Dyneema, Ø 4, SWL 1200 kg Model: SL4D The use of Dyneema lines, characterized by high stiffness and strength and by excelle...

Double deck ring realized in hard black anodized aluminum, hole Ø 18 Model: R18.36 Two sizes, highly polished and hard black anodized aluminium dec...

Double Deck Ring, Central hole Ø 12 Model: R12.25 Two sizes, highly polished and hard black anodized aluminium deck ring. The wide hole allows the ...

Mini Snatch Block, Sheave D32, SWL 250 kg, Color Black Model:  9030/B The cheek plate revolves around the sheave axle allowing the block to open; a...

Ring & loop realized in hard black anodized aluminum and loop in Dyneema, hole Ø 20 Model: RL6.1 Low friction rings are at the heart of Soft li...

Ring & loop realized in hard black anodized aluminum and loop in Dyneema, hole Ø 14 Model: RL5.0 Low friction rings are at the heart of Soft li...

MRO with 4 holes realized in hard black anodized aluminum, For line Ø 14 Model: R4.14 Soft link is here meant as hardware on deck. These soft link ...

Ring realized in hard black anodized aluminum, hole Ø 28 Model: R28.20 Low friction rings are at the heart of Soft links. Simple, lightweight and r...

HS22.50/R system, HS Simple Sliders 50mm, Track 22x11, For Racing boats up to 50'.  Four different slider types may form a Full batten system: si...

HS22.40/R system, HS Simple Sliders 40mm, Track 22x11, For Racing boats up to 40'.  Four different slider types may form a Full batten system: si...

Snatch Block, Sheave D60, SWL 1300 kg Model:  9060 The cheek plate revolves around the sheave axle allowing the block to open; a safety pin, which ...

Mini Snatch Block (Color Yellow), Sheave D32, SWL 250 kg, With Shackle  Model:  9031/Y It is a very light solution suitable for many riggings, comp...

Organizer for V-Grip Maxi,  6 Sheave Organizer Model:  526.052  Organizers allow manoeuvres to be guided from the clutches to the winch. They keep ...

Two switches with watertight protection must be installed for each winch. To identify the first and second speed, 2 colours are used:  Red and Grey...

XT ST Race Winch, Power 44, 2 Reduced Speeds Model:  XT44R XT R is the racing winch series obtained from the standard XT series. Self-tailing XT sy...

Replacement Winch Handle Rubbers Small Model:  Y-W0723  

Replacement Winch Handle Rubbers Small Model:  Y-W0723  

Antal Delrin Balls  1/4 6,35 Model:  SFD000  

Antal Roller Cleat L=280mm  14M Boat Model:  RC280  

Snap Loops with Cover D8mm  Replacement Dyneema Loop for the Antal Spinning Ring spliced Dyneema line without cover Aluminium locking bones suitab...

Winch Handle, Single Hand Grip, Length = 250 mm, Custom made- Natural Bronze and Wooden Grip. Model:  2031/WBN In addition to the extremely light b...

Mast Block, Sheave Ø 80, SWL 3000 kg Model:  00818/Z 12 different sizes with diameters from 40 to 140 mm for working loads (SWL) up to 9000 kg. Har...

Antal Mini snap loop in Dyneema, Ø 5, SWL 1000 kg Model: SL5S The use of Dyneema lines, characterized by high stiffness and strength and by excelle...

Organizer for V-Grip Plus,  4 Sheave Organizer Model:  524.042  Organizers allow manoeuvres to be guided from the clutches to the winch. They keep ...

Vertical Fix, Sheave Ø 40, SWL 600 kg Model:  00423

Two switches with watertight protection must be installed for each winch. To identify the first and second speed, 2 colours are used:  Red and Grey...

Winch Handle, Single Hand Grip, Length = 250 mm, Custom made- Wooden Grip. Model:  2031/W In addition to the extremely light black aluminium handle...

Mini Snatch Block, Sheave D32, SWL 250 kg, Color Yellow Model:  9030/Y The cheek plate revolves around the sheave axle allowing the block to open; ...

HS30.90 System, Headboard 60°, Track 30x13, for Boats up to 80'-90' Model: HS3076 The headboard sewed with webbings attaches the headboard slider...

HS24.70 System, Headboard 90°, Track 24x16, for Boats up to 70' Model: HS2479 The headboard sewed with webbings attaches the headboard slider to ...

HS24.60 system, Slider with Joint 50 mm, Track 242x16, for Boats up to 60' Four different slider types may form a Full batten system: simple, with ...

HS24.50 system, HS Simple Sliders 50mm, Track 24x16, For boats up to 50'.  Four different slider types may form a Full batten system: simple, wit...

HS22.60 System, Headboard 90°, Track 24x16, for Boats up to 60' Model: HS24.69 The headboard sewed with webbings attaches the headboard slider to...

HS22.60 System, Headboard 60°, Track 24x16, for Boats up to 60' Model: HS24.66 The headboard sewed with webbings attaches the headboard slider to...

HS22.60/R system, 60 mm Slider with Joint, Track 22x11, for Racing Boats up to 60' Four different slider types may form a Full batten system: simpl...

Headboard 60°, Track 24x16, for Racing Boats up to 50' Model: HS24.56 The headboard sewed with webbings attaches the headboard slider to the sail t...